Offroad equipment and repair

ARB

ARB Portable Ground Anchor ARB230

Without a suitable anchor point, a winch is all but useless. There are many environments such as deserts or alpine regions where trees are few and far between, and for this reason, a ground anchor is a worthwhile addition to your recovery kit.

$588.50

ARB Recovery Damper ARB220

One winching precaution is the fitting of a recovery damper prior to a load being applied. In the unlikely event of a wire rope or strap failure, the recovery damper will absorb most of the energy in the cable or strap, significantly reducing the recoil. ARB's recovery damper is manufactured from heavy duty vinyl and features storage pockets which come in handy for carrying snatch blocks and shackles when walking from your 4wd to an anchor point. As recovery dampers are now mandatory accessories for most 4wd competitions, the ARB damper exceeds minimum competition weight requirements.
$37.50

ARB Snatch Block ARB209

ARB snatch blocks feature side plates that sit snug against the pulley, eliminating the possibility of the winch cable becoming trapped between the pulley and the side plates. The groove on the pulley itself tapers down to the center allowing for a variety of cable sizes (1/4"-1/2") to be used and ensures the cable is seated securely in the pulley, minimizing lateral movement. to ensure smooth pulley operation, the hardened steel pin is fitted with a nipple, to which grease can be periodically applied.

$89.00

ARB Ultra Lite Snatch Block (10100020)

ARB snatch blocks feature side plates that sit snug against the pulley, eliminating the possibility of the winch cable becoming trapped between the pulley and the side plates. The groove on the pulley itself tapers down to the center allowing for a variety of cable sizes (1/4"-1/2") to be used and ensures the cable is seated securely in the pulley, minimizing lateral movement.

$111.00

ARB501 Large Gear Bag

ARB's winch pack is designed to fit a complete recovery kit including snatch strap, tree trunk protector, winch extension strap, snatch block, recovery damper, bow shackles and gloves. The winch pack is sold individually and does not come stocked with the straps. All items sold separately so the user can select the correct strap weights for their vehicle.

$55.00

ARB502 Small Gear Bag

The compact recovery bag is a multi-purpose bag that will suit a variety of equipment, from recovery gear to camping supplies. The compact recovery bag is sold individually and does not come stocked with the straps.

$41.00

ARB Snatch Strap

Specifically designed to stretch under load for maximum performance, an ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present. How it works: the elasticity in a snatch strap is what makes it such an essential piece of recovery gear. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage

ARB720 Recovery Winch Ext Strap 9,900lb

Minimum Breaking Strength: 9,900lb

Width: 2 1/8 100% Polyester

This strap is used for a winch extension when you cant reach a solid recovery point with your winch line . We recommend this strap for winches up to 8000lb and our 17,500lb strap for the larger winches .

$74.00

ARB725 Recovery Winch Ext. Strap 17,600lb

An ARB winch extension strap is perfect for extending the length of your winch's cable when the most suitable anchor point is out of reach. These non stretch straps are lighter and easier to store than additional lengths of wire rope.

$121.00

ARB Tree saver

When using a tree as an anchor point in a recovery situation, wrapping cable, rope or chain around it causes damage to both your equipment and the tree. ARB's tree trunk protectors help eliminate the risk of ring barking and ensure safe vehicle recovery.

TIRE INFLATION KIT FOR ARB AIR COMPRESSORS 171302

Due to the incredible air-output produced from the Hi-Output CKMA12 compressor, this air compressor requires a unique, high-heat tolerant hose, specially sourced from Japan. Designed by ARB engineers for maximum air flow this Tire Inflation Kit also includes a dust free air chuck, which boasts an enclosed internal bearing system to prevent dirt ingestion.

Kit Includes:
1 x High heat pressure hose
1 x ARB air chuck with quick press fitting
1 x ARB T-fitting for use with the CKMA12 ARB air compressor
an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls.
-- Air up quickly with the ARB Tire Inflation Kit! --

$35.00

ARB Large On-Board High Performance 12 Volt Air Compressor CKMA12

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB Pump-Up Kit (part #171302) can be used to activate air lockers, and can perform other functions such as inflating camping gear.

So what makes this compressor special? It's small enough to fit into even the tightest space and quiet enough to mount in the cab. It has enough output to air up four 35" - 37" tires in a single duty cycle and typically airs up a 35" tire in just over two minutes. And, it works. We've tested this unit in ovens, freezers, underwater and in the silty dust of the Simpson Desert and it continues to perform.

Kit Includes:
Full assembled and bench tested air compressor
Complete wiring loom with Air Locker™ solenoid plug-in contacts
OEM quality compressor isolating switch
Air Locker™ supply rated pressure switch
Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
Mounting hardware with reinforcing backing plate
Comprehensive photo illustrated installation guide

Optional Accessories:
Full assembled and test air compressor
Complete wiring loom with Air Locker™ solenoid plug-in contacts
OEM quality compressor isolating switch
Air Locker™ supply rated pressure switch
Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
Mounting hardware with reinforcing backing plate
Comprehensive photo illustrated installation guide
Features:
Compact design makes it the highest flowing compressor in its class (voltage vs size)
Fully sealed components for moisture and dust
Pressure switch controlled air manifold systems specially designed to suit ARB Air Locker™ equipped vehicles
Hard anodized cylinder bore and PTFE (Teflon) impregnated carbon fiber piston seal for reduced friction and maximum trouble free life
New anodized mounting bracket dissipates motor heat and allows compressor to be repositioned 180°
Anti-vibration/sound deadening mount
Relocatable splash resistant air filter assembly for cleaner, cooler air supply
and versatile waterproof air intake positioning
High density, high flow washable sintered bronze air filter element
Maxi-Fuse equipped for professional in-line circuit protection
Motor is 100% ball bearing equipped with unique linear brush pre-load system for extra long life, low heat and quiet operation
Compressor piston is equipped with a German made high shock rated cylindrical roller bearing
Constructed entirely of light weight, high strength engineering grade materials, including military and aerospace grade components
Over-pressure safety valve equipped
Motor is internally thermal protected against extreme temperature damage
For technical specifications please contact us

$275.50

ARB On-Board High Performance 12 Volt Twin Air Compressor CKMTA12

ARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.

Applications:

Pneumatic supply and electrical control for ARB Air Locker(s). (Air Locker Manifold Kit #171503 required)

Rapid inflation of small, medium and large tires.

Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.

Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.

Kit Includes :

Fully assembled and tested air compressor (12V or 24V).

Complete wiring loom w/ Air Locker solenoid plug-in terminals.

Automotive OEM quality compressor isolating switch.

2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.

Mounting bolts and washers.

Comprehensive photo illustrated installation guide.

Features:

Available in 12V (CKMTA12) or 24V (CKMTA24) models.

Constructed primarily of light weight, high strength, engineering grade

materials, including military and aerospace standard components.

Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.

Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].

High efficiency design consumes only 56 Amps at maximum air flow.

Built with sealed components for moisture and dust resistance.

Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon

fiber piston seals for reduced friction and maximum trouble free life.

Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).

Anti-vibration / sound deadening is integrated into the mount.

Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.

High density and high flow washable sintered bronze air filter elements.

Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).

Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.

Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

Motors are internally thermal protected against extreme temperature damage.

Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.

Over-pressure safety valve equipped.

Sealed illuminated automotive grade dash switch included.

Fully serviceable and all replacement parts available.

EMF suppressed for use in proximity to sensitive electronic equipment.

CE and C-Tick compliant.

Engineered, built, and individually dyno-tested in Australia from local and imported components.

$517.50

ARB Roof Racks

ARB roof racks are engineered to support the full load capacity of a vehicle. Extensive research, design and testing goes into all ARB racks to ensure their functionality is not compromised even in the most demanding conditions.
CONTACT FOR PRICING

RK9 Recovery Kit

This is the best Value for anyone wanting to have everything they need for a safe vehical recovery all in one well laid out kit.

This Premium Kit Includes:

17,500 lb snatch strap
9,900lb winch extenstion strap
26,500lb tree trunk protector
19,800lb snatch block
Recovery damper
Winch pack storage bag with bow shackles & gloves

$398.00

ARB AIR LOCKER DANA

Air Lockers are currently available in over 100 configurations to suit a wide range of 4x4 vehicles. Because the Air Locker is only engaged when needed, it can be installed in BOTH the front and rear axles, with separate switches independently controlling the locker from within the truck. Prices vary dependant on small or large air lockers- contact for pricing
CONTACT FOR PRICING

ARB E-Z Deflator Kit ARB505

The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.

Features:

Corrosion Resistant Brass/Stainless Deflator Tool

Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude

Fully Geared, Solid Brass Precision Movement

Protective Rubber Gauge Guard

Easy to Read Dial with One PSI Increments

Thoroughly Designed and Tested to Ensure Accuracy

Includes Protective Canvas Pouch and Instruction Sheet

Fitting Instructions & Warranty available

$39.50

ARB Small On-Board High Performance 12 Volt Air Compressor CKSA12

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor is designed to activate up to two ARB air lockers

$169.50

ARB Speedy Seal Tire Repair Kit 10000010

Coming in a compact carry case, the speedy seal includes all the components necessary to repair tubeless radial or cross ply tires, without removing the tire from the vehicle or rim. This includes a quality pencil type tire gauge with dual pressure range and dual chuck, insertion and reamer tools, lubricant, additional valve accessories and 30 self vulcanizing repair cords for complete air sealing. Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you've got all the necessary equipment for making emergency repairs.

$40.00

ARB Tire Valve Stem Caps 217362

In a further addition to the ever expanding ARB promotional line, the ARB USA Marketing department has just released ARB Tire Valve Stem Caps. Available in black, red and silver . Made from aluminum, each cap has a small ARB logo on the top for increased branding while each package features a fantastic full color print.

Each pack contains x5 caps

PLEASE SPECIFY COLOR!

$9.50

ARB Awning

Easy to mount and operate, these retractable awnings fit on to the side of a roof rack, and are conveniently stored for immediate use on arrival. specifically designed for harsh outback conditions, the awnings are rugged but lightweight, and provide fast and convenient protection from the elements.- shade cover made from pvc lined polyester - waterproof and uv protected- self standing awning takes 30 seconds to deploy- awning is secured in a heavy duty nylon reinforced pvc bag- mounts easily to the side of most roof racks or roof bars- awning height adjustable with telescopic legs- optional mosquito net available for extra protection- comes with pegs and guy ropes for securing legs, mounting nuts and bolts, spanner and comprehensive instructions.

This part will fit all vehicle makes and models

Three sizes available:

4.1FT Long, 6.5FT Long, 8.2FT Long.

Prices vary!
CONTACT FOR PRICING

ARB fridge slide

Suitable for a range of 30-50qt fridges, the ARB fridge slide ensures easy access to your fridge and features a multi-position latch and a lock-in lock-out mechanism to ensure that your slide stays in position no matter what position your vehicle is in.
CONTACT FOR PRICING

ARB Fridges

ARB fridge freezers are the ideal way to keep your food and beverages chilled or frozen on your 4x4 adventures, regardless of ambient conditions. Not to be confused with less effective 12 volt ‘coolers’, the ARB unit is a true refrigerator/freezer. Own one and you’ll never again find your lunch water- logged by shifting ice, and there’ll always be a cold drink on hand during the sweltering summer months.

Two separate power cords are included, one for AC operation (120 volt) at home, and one for DC operation (12/24 volt) in your vehicle. The all-new 50 qt model is able to maintain sub-freezing temperatures in 90° F heat, while only drawing 0.87 amps per hour from a 12 volt power source… that’s less than a single headlamp draws!

100% CFC free

Low amp draw

Ice free operation

Three year warranty

Powder coated zinc steel cabinet shell. Zinc steel provides excellent corrosion resistance

Recessed powdered coated steel fixed carry handles

Two piece injection molded lid, UV stable

Convenient on/off power indicator

Integrated battery protection system (12/24V DC)

Solar panel & generator compatible

Deep storage capacity for large upright bottles

User friendly, forward facing thermostat control

Built-in 12, 24 and 120 volt facility, making it ideal for use as a second fridge

Rounded corners & edges to protect vehicle upholstery

Fully removable lid & basket for easy access & cleaning

Ventilation grills allow operation even in the most confined cargo areas

User friendly, right angled plug-in point from cord to fridge

Operates at extreme angles (up to 30°;) without affecting operation or reliability

TECHNICAL

Recessed front mounted digital control panel

Internal LED cabinet light

Separate dairy/fruit compartment

Interior drain plug

Unique stainless steel detent hinge with quick release mechanism

Integrated battery protection system (12/24V DC)

Integrated power system - No external power transformers required to operate the fridge on 12V DC, 24V DC or 110V AC

Available in 37, 50 63 and 82 quart

Prices start at $768.00
CONTACT FOR PRICING

ARB fridge transit bag

An optional transit bag is available to aid with insulation and protect your fridge from inevitable scrapes and dents. Prices vary with size.
CONTACT FOR PRICING

ARB Roof Top Tent

The ARB Simpson III Rooftop Tent will provide the ultimate in ease and convenience when travelling. Unfolding in minutes, a rooftop tent provides sleeping quarters off the ground, protected from the elements. Spacious and comfortable, all bedding can remain inside the tent during the journey, freeing up vital storage space in the vehicle, and allowing the tent to be quickly and easily packed away.

Features:

Series III Tent Incorporates an Updated Design and New Materials for Better Strength, Rigidity and Water Resistance

Manufactured from High Quality, Poly/Cotton Fabric

Incorporates Oxford Polyester Flysheet, with Excellent Water Shedding Ability

Sturdy Aluminum Retractable Ladder

High Density Bonded Chip Foam Mattress with Removable Cover for Increased Comfort and Durability

Incorporates Pull Out Veranda and Optional Zip-On Annex

Insect Screened Windows and Door

SUV Stabilised Laminated PVC Cover

Bungee Cord System to Assist When Closing

Easily Mounted to ARB's Purpose Designed Roof Rack

Can be Configured to Unfold off Either the Side (Shown) or Off the Rear of the Vehicle

Size: 1400mm wide x 2400mm long x 1300mm high

All Aluminium Components Feature an Anodized Finish for Improved Corrosion Resistance and Apperance

Comes Complete with Mounting Hardware, Wrenches, Ladder, Travel Cover and Comprehensive Instructions

The ARB Rooftom Tent can be mounted to an ARB touring style rack or any flat roof bar system with 95lb kinetic load rating.

ARB Awnings can Also be Paired with the Rooftop Tent.

$1,490.50

ARB Deluxe Bar Land Rover Defender 90,110,130 1985 - On 3432300

Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

Product Features :

Recessed Indicators

Tow Points

Powdercoat Black

Antenna Mounts

Required Parts:

These parts are required for installing this product on your vehicle.

3532070 - Winch Spacer Kit (If Installing Warn XD9000)

Optional Products:

Warn Winch XD9000

IPF 800 Series or 900 Series lights
CONTACT FOR PRICING

ARB Sahara Bar Land Rover Discovery II 2003-04 3932020

Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Sahara Bar selection is the most stylish in the ARB bumper line. A lower bumper unit fitted with a Chrome Hoop for enhanced styling and greater grill protection. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

Product Features:

Air Bag Approved

Recessed Indicators

Retains Original Equipment Fog Lamps

Powerdercoat Gray

Retains Original Equipment Tow Points

Light Mounts

Antenna Mounts

Optional Parts:

Warn Winch XD9000 or M8000

IPF 800 Series or 900 Series lights
CONTACT FOR PRICING

PRODUCTS

MANUFACTURERS

HOW TO ORDER

Shipping varies on location & product weight. Please contact us for a freight quote & invoice via email or phone.

CONTACT

akarover1@gmail.com

1 (907) 350 - 0122

WE ACCEPT