Offroad equipment and repair

EXPEDITION EQUIPMENT

 ARB Large On-Board High Performance 12 Volt Air Compressor CKMA12

ARB Large On-Board High Performance 12 Volt Air Compressor CKMA12

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB Pump-Up Kit (part #171302) can be used to activate air lockers, and can perform other functions such as inflating camping gear.

So what makes this compressor special? It's small enough to fit into even the tightest space and quiet enough to mount in the cab. It has enough output to air up four 35" - 37" tires in a single duty cycle and typically airs up a 35" tire in just over two minutes. And, it works. We've tested this unit in ovens, freezers, underwater and in the silty dust of the Simpson Desert and it continues to perform.

Kit Includes:
Full assembled and bench tested air compressor
Complete wiring loom with Air Locker™ solenoid plug-in contacts
OEM quality compressor isolating switch
Air Locker™ supply rated pressure switch
Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
Mounting hardware with reinforcing backing plate
Comprehensive photo illustrated installation guide

Optional Accessories:
Full assembled and test air compressor
Complete wiring loom with Air Locker™ solenoid plug-in contacts
OEM quality compressor isolating switch
Air Locker™ supply rated pressure switch
Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
Mounting hardware with reinforcing backing plate
Comprehensive photo illustrated installation guide
Features:
Compact design makes it the highest flowing compressor in its class (voltage vs size)
Fully sealed components for moisture and dust
Pressure switch controlled air manifold systems specially designed to suit ARB Air Locker™ equipped vehicles
Hard anodized cylinder bore and PTFE (Teflon) impregnated carbon fiber piston seal for reduced friction and maximum trouble free life
New anodized mounting bracket dissipates motor heat and allows compressor to be repositioned 180°
Anti-vibration/sound deadening mount
Relocatable splash resistant air filter assembly for cleaner, cooler air supply
and versatile waterproof air intake positioning
High density, high flow washable sintered bronze air filter element
Maxi-Fuse equipped for professional in-line circuit protection
Motor is 100% ball bearing equipped with unique linear brush pre-load system for extra long life, low heat and quiet operation
Compressor piston is equipped with a German made high shock rated cylindrical roller bearing
Constructed entirely of light weight, high strength engineering grade materials, including military and aerospace grade components
Over-pressure safety valve equipped
Motor is internally thermal protected against extreme temperature damage
For technical specifications please contact us

$275.50

 ARB On-Board High Performance 12 Volt Twin Air Compressor CKMTA12

ARB On-Board High Performance 12 Volt Twin Air Compressor CKMTA12

ARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.

Applications:

Pneumatic supply and electrical control for ARB Air Locker(s). (Air Locker Manifold Kit #171503 required)

Rapid inflation of small, medium and large tires.

Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.

Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.

Kit Includes :

Fully assembled and tested air compressor (12V or 24V).

Complete wiring loom w/ Air Locker solenoid plug-in terminals.

Automotive OEM quality compressor isolating switch.

2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.

Mounting bolts and washers.

Comprehensive photo illustrated installation guide.

Features:

Available in 12V (CKMTA12) or 24V (CKMTA24) models.

Constructed primarily of light weight, high strength, engineering grade

materials, including military and aerospace standard components.

Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.

Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].

High efficiency design consumes only 56 Amps at maximum air flow.

Built with sealed components for moisture and dust resistance.

Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon

fiber piston seals for reduced friction and maximum trouble free life.

Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).

Anti-vibration / sound deadening is integrated into the mount.

Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.

High density and high flow washable sintered bronze air filter elements.

Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).

Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.

Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

Motors are internally thermal protected against extreme temperature damage.

Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.

Over-pressure safety valve equipped.

Sealed illuminated automotive grade dash switch included.

Fully serviceable and all replacement parts available.

EMF suppressed for use in proximity to sensitive electronic equipment.

CE and C-Tick compliant.

Engineered, built, and individually dyno-tested in Australia from local and imported components.

$517.50

 ARB Portable Ground Anchor ARB230

ARB Portable Ground Anchor ARB230

Without a suitable anchor point, a winch is all but useless. There are many environments such as deserts or alpine regions where trees are few and far between, and for this reason, a ground anchor is a worthwhile addition to your recovery kit.

$588.50

 ARB Roof Racks

ARB Roof Racks

ARB roof racks are engineered to support the full load capacity of a vehicle. Extensive research, design and testing goes into all ARB racks to ensure their functionality is not compromised even in the most demanding conditions.
CONTACT FOR PRICING
 ARB501 Large Gear Bag

ARB501 Large Gear Bag

ARB's winch pack is designed to fit a complete recovery kit including snatch strap, tree trunk protector, winch extension strap, snatch block, recovery damper, bow shackles and gloves. The winch pack is sold individually and does not come stocked with the straps. All items sold separately so the user can select the correct strap weights for their vehicle.

$55.00

ARB Tree Saver

ARB Tree Saver

When using a tree as an anchor point in a recovery situation, wrapping cable, rope or chain around it causes damage to both your equipment and the tree. ARB's tree trunk protectors help eliminate the risk of ring barking and ensure safe vehicle recovery.
 RK9 Recovery Kit

RK9 Recovery Kit

This is the best Value for anyone wanting to have everything they need for a safe vehical recovery all in one well laid out kit.

This Premium Kit Includes:

17,500 lb snatch strap
9,900lb winch extenstion strap
26,500lb tree trunk protector
19,800lb snatch block
Recovery damper
Winch pack storage bag with bow shackles & gloves

$398.00

 Safari Snorkel Kits

Safari Snorkel Kits

A Safari snorkel will significantly reduce the hazards of engine damage during water crossings. Prices start at $444.00 email for a quote on your vehical
CONTACT FOR PRICING
 TIRE INFLATION KIT FOR ARB AIR COMPRESSORS 171302

TIRE INFLATION KIT FOR ARB AIR COMPRESSORS 171302

Due to the incredible air-output produced from the Hi-Output CKMA12 compressor, this air compressor requires a unique, high-heat tolerant hose, specially sourced from Japan. Designed by ARB engineers for maximum air flow this Tire Inflation Kit also includes a dust free air chuck, which boasts an enclosed internal bearing system to prevent dirt ingestion.

Kit Includes:
1 x High heat pressure hose
1 x ARB air chuck with quick press fitting
1 x ARB T-fitting for use with the CKMA12 ARB air compressor
an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls.
-- Air up quickly with the ARB Tire Inflation Kit! --

$35.00

 QUICK FIST Roll Bar Tool Mount #90050

QUICK FIST Roll Bar Tool Mount #90050

Use with the Original QUICK FIST clamp #10010 (sold separately) to mount a flashlight, shovel, axe, high lift jack or other tools from 1" to 2.25" (25 to 57mm) in diameter to a roll bar.

Use with the SUPER QUICK FIST clamp #20020 (sold separately) to mount a fire extinguisher, air tank, nitrous tank or other tools from 2.5" to 9.5" (64 to 241 mm) in diameter to a roll bar.

The safe working load for two QUICK FIST Roll Bar Mounts on roll bars less than 1.5" in diameter is 50lbs. Roll bars 1.5" in diameter or larger, the safe working load is 100lbs.

Fits all roll bars from 1” to 2.5” (25 to 64mm) in diameter

Contents:

2 ea Derlin® Roll Bar Mounts
2 ea 9/16" x 4" Stainless Steel Hose Clamps
2 ea 7"x1.5" Neoprene Rubber Strips
6 sets: 7/8" x #10 Stainless Steel Bolts, Washers and Nuts
$29.95
 QUICK FIST Clamp Mounting Kit - Item #90010

QUICK FIST Clamp Mounting Kit - Item #90010

Quick Overview

* Three of our top selling clamps in one money saving package!

* Each package contains 2 MINI QUICK FIST clamps; 4 Original QUICKFIST clamps; and 2 SUPER QUICK FIST clamps.

8 Clamps Per Package
$39.95
 QUICK FIST Rubber Tie Down Belt - Items #11050 & #11060

QUICK FIST Rubber Tie Down Belt - Items #11050 & #11060

Quick Overview

Significantly Stronger, Wider & More Weather Resistant than Bungee Cord! 38"L x 1.5"W X .25"D (965x38x6mm) Belt that Secures Equipment

• Not affected by hot or cold climates
• UV resistant
• Two belts can be "buttoned" together to almost double its length with the connector included in every package.
• For use on work & emergency vehicles, off road & military trucks, ATVs and boats.

Securing equipment with two belts is always safer than one. 30lb propane tanks, 10 gallon water containers, Jerry cans and similar items always need two belts.
$14.95
 MINI QUICK FIST clamp - Item #30050

MINI QUICK FIST clamp - Item #30050

Quick Overview

• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter.
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50 lbs (23 kilos).
• Mounts easily with one #10 bolt.
• Mounting area: 1 1/2" x 1 1/2" (38 x 38mm)

2 Clamps Per Package
$8.75
 Original QUICK FIST clamp - Item #10010

Original QUICK FIST clamp - Item #10010

Quick Overview

• Holds objects 1" to 2.25" (25 to 57mm) in diameter.
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50lbs (23 kilos).
• Mounts easily with one #10 bolt or screw.
• Mounting area: 2 1/2" x 3/4" (64x19mm).

2 Clamps Per Package
$10.95
 SUPER QUICK FIST clamp - Item #20020

SUPER QUICK FIST clamp - Item #20020

Quick Overview

• Holds objects from 2.5" to 9.5" (64 to 240mm) in diameter.
• Each clamp supports a safe working load of 50lbs (23 kilos).
• 2 clamps support 100lbs (45 kilos).
• Mounts with three #10 bolts or screws.
• Mounting area: 6" x 7/8" (152 x 22mm).

1 Clamp Per Package
$10.95
 QUICK FIST XL clamp - Item #60060

QUICK FIST XL clamp - Item #60060

Quick Overview

• Two 14’’ (356mm) separate straps hold round objects up to 15” (381mm) in diameter.
• Holds equipment measuring up to 28” (711mm) in linear distance.
• Each clamp supports a safe working load of 150lbs. (68 kilos) with a break-strength of 300lbs. (176 kilos).
• Two clamps support 300lbs with a break-strength of 600lbs (272 kilos).
• Each half of the clamp mounts with four #10 screws or bolts.
• Mounting Area: 2” x 2” (51mm x 51mm)

2 Clamps Per Package
$24.95
 3" QUICK FIST clamp - Item #50050

3" QUICK FIST clamp - Item #50050

Quick Overview

• Holds objects from 2 3/4" to 3 1/4" (70mm to 83mm) in diameter.
• Each clamp supports a safe working load of 50lbs (23 Kilos).
• Mounts easily with one 1/4" (6mm) bolt or screw.
• Mounting area: 4 1/2” x 1 1/4” (113mm x 32mm).

1 Clamp Per Package
$10.95

PRODUCTS

MANUFACTURERS

HOW TO ORDER

Shipping varies on location & product weight. Please contact us for a freight quote & invoice via email or phone.

CONTACT

akarover1@gmail.com

1 (907) 350 - 0122

WE ACCEPT